Proflow Raw Aluminium Alternator 100 AMP External Regulator for Ford Falcon XR XT 200 221 250 New

Proflow Raw Aluminium Finish 100 Amp Alternator with External Regulator
Suitable for Ford 6 Cylinder 200, 221, 250 Engines as fitted to:

• XR XT XW XY Falcon
• XA XB XC Falcon
• XD XE XF Falcon
• TC TD Cortina
• TE TF Cortina

Designed and engineered in-house, Proflow products are manufactured to the highest of standards. Proflow products are computationally optimized and tested within their own engineering department. Rapid prototypes are created to guarantee perfect fitment, as well as pleasing aesthetics. Proflow take pride in every part they make. Remember, Proflow are the leaders in performance products!

Replace the alternator in your early GM, Ford, or Chrysler with Proflow's PowerSpark alternators, you will have the genuine look in some most cases while incorporating the technology of today. PowerSpark alternators are available in raw aluminium, chrome, black or our new black wrinkled finishes. These are available in a variety of amperages and styles, allowing you to choose the best model for your application. So whether you need an alternator for your Street car, hot rod, muscle car PowerSpark gives you the power you need. All PowerSpark Alternators are factory tested before shipping to ensure a hassle free product.

Assembled with top quality components and factory load tested to meet or exceed OEM specifications and ensure the highest output possible at low RPM. Supplied in a one-wire hookup configuration enabling you to run a single wire from the alternator to the battery (positive). 

Don't waste big dollars having your original alternator rebuilt, when you can buy a Genuine Proflow 100 Amp Raw Aluminium Alternator to suit external reg at such a bargain price!

Specifications:

• Proflow PFEPM3905N 100 Amp Raw Aluminium Alternator
• High quality finish & design
• Suitable for use with an external regulator setup
• One wire hookup
• 100 Amp
• Aftermarket Alternator Ford Upgrade
• w/1 V-Belt Pulley
• Oem style
• Factory load tested before being packed
• Supplied and fitted complete with matching alternator pulley
• 12 month warranty
   

Fitment Notes:

• Suitable for the following engine application:
  • Ford 289ci 302 351 400 Small Block V8
  • Ford 390 427 428 FE V8
  • Ford 429ci Big Block V8
• Suitable to replace existing 1 wire, external regulator Ford style alternator (Regulator not supplied)
• Mounts measure approximately 21mm outside depth on the short side, 76mm outside depth on the long side
• The measurement between the mounts from the inside edge, to inside edge is 166mm
• The measurement from the front face of the alternator body, to the front face of the alternator pulley is 36mm. Please use this measurement to check that this alternator will match your belt line
• Please use the above measurements and information to compare to your original alternator, to ensure correct fitment for your vehicle