Ford Mustang Windsor V8 Aeroflow Chrome Alternator 140 Amp Internal Regulator

Aeroflow Triple Chrome Plated 140 Amp Alternator with Internal Regulator
Suitable for Ford Windsor & Cleveland V8 - 289, 302, 351 Engines as fitted to:
    XR XT XW XY Ford Falcon
    XA XB XC Ford Falcon
    Ford Mustang
    Ford Bronco
    Ford F100, F250, F350

Aeroflow has become synonymous with premium quality performance products. Aeroflow's objective has been to incorporate state-of-the-art manufacturing, aerospace quality materials and rigid quality controls to produce quality performance products at extraordinary value, and they’ve done it again with their range of high performance intercoolers.

Aeroflow alternators are manufactured with 100% New components, with completely sealed bearings for reliable operation. Aeroflow alternators have a high Amperage output during idle operation and feature heavy duty internals and regulators for a stable output, and can be wired for either 1-wire or 3-wire installation

Assembled with top quality components and factory load tested to meet or exceed OEM specifications and ensure the highest output possible at low RPM. Supplied in a one-wire hookup configuration enabling you to run a single wire from the alternator to the battery (positive). Hand polished and triple chrome plated to a mirror finish.
Don't waste big dollars having your original alternator rebuilt, when you can buy a Genuine Aeroflow 140 Amp Chrome Alternator with inbuilt internal regulator at such a bargain price!

Specifications:

• Aeroflow AF4873-1140 140 Amp Chrome Alternator
• High quality finish
• Hand Polished and triple chrome plated to a mirror finish
• Internal Regulator
• Can be used in either 1 wire or 3 wire hookup configuration
• Self exciting type alternator
• Huge 140 Amp output
• Factory load tested and certified before being packed
• Supplied and fitted complete with matching chrome alternator pulley
• 12 month warranty

Fitment Notes:

• Suitable to replace existing 1 wire, V-Belt type, internal regulator Ford style alternator.
• Mounts measure approximately 21mm outside depth on the short side, 76mm outside depth on the long side.
• The measurement between the mounts from the inside edge, to inside edge is 166mm.
• The measurement between the mounts from the bolt centres is 6.60".
• Utilizes the the standard GM 10SI style case with 6.600” bolt centres.
• Total length from the front of the rotor shaft to the deepest point at the rear of the case is approximately 165mm.
• Please use the above measurements and information to compare to your original alternator, to ensure correct fitment for your vehicle.