GM Big Block Chev V8 396 427 454 Aeroflow Chrome Alternator 120 Amp Internal Reg

Aeroflow Triple Chrome Plated 120 Amp Internal Regulator Alternator
Suitable for Big Block Chevrolet V8, 396, 427, 454

Aeroflow has become synonymous with premium quality performance products. Aeroflow's objective has been to incorporate state-of-the-art manufacturing, aerospace quality materials and rigid quality controls to produce quality performance products at extraordinary value, and they’ve done it again with their range of high performance intercoolers.

Aeroflow alternators are manufactured with 100% New components, with completely sealed bearings for reliable operation. Aeroflow alternators have a high Amperage output during idle operation and feature heavy duty internals and regulators for a stable output, and can be wired for either 1-wire or 3-wire installation

Assembled with top quality components and factory load tested to meet or exceed OEM specifications and ensure the highest output possible at low RPM. Supplied in a one-wire hookup configuration enabling you to run a single wire from the alternator to the battery (positive). Hand polished and triple chrome plated to a mirror finish.
Don't waste big dollars having your original alternator rebuilt, when you can buy a Genuine Aeroflow 120 Amp Chrome Alternator with inbuilt internal regulator at such a bargain price!

Specifications:

• Aeroflow AF4870-1120 120 Amp Chrome Alternator
• High quality finish
• Hand Polished and triple chrome plated to a mirror finish
• Internal Regulator
• Can be used in either 1 wire or 3 wire hookup configuration
• Self exciting type alternator
• Huge 120 Amp output
• Factory load tested and certified before being packed
• Supplied and fitted complete with matching chrome alternator pulley
• 12 month warranty

Fitment Notes:

• Suitable to replace existing 1 wire, V-Belt type, internal regulator GM style alternator.
• Mounts measure approximately 18mm outside depth on the short side, 51mm outside depth on the long side.
• The measurement between the mounts from the inside edge, to inside edge is 159mm.
• The measurement between the mounts from the bolt centres is 6.60".
• Utilizes the the standard GM 10SI style case with 6.600” bolt centres.
• Total length from the front of the rotor shaft to the deepest point at the rear of the case is approximately 165mm.
• Please use the above measurements and information to compare to your original alternator, to ensure correct fitment for your vehicle.