Proflow EFI 380LH 1000HP Fuel Pump Silver Bracket E85 Compliant Bosch 044 style

Designed and engineered in-house, Proflow products are manufactured to the highest of standards. Proflow products are computationally optimized and tested within their own engineering department. Rapid prototypes are created to guarantee perfect fitment, as well as pleasing aesthetics. Proflow take pride in every part they make. Remember, Proflow are the leaders in performance products!

Tuff Car Parts is now stocking a contender for the best pump equivalent to take the mantle from the infamous the Bosch Motorsports 044. Introducing the Proflow EFI 1,000hp Fuel Pump.

This genuine Proflow pump was cleverly designed as universal product, and as such will work on any vehicle (obviously some modifications may be required on some models). Utilising the traditional fuel pump size of 60mm allows fitment to the overwhelming majority of pump brackets that were designed to hold pumps such as the Bosch 044.

Providing a truly impressive 380 Litres Per Hour free flow which is capable of supporting in excess of 1,000 horsepower when fitted to an N/A vehicle, or a dizzying 800hp for forced induction applications under high boost. The pump draws a maximum current of 17amps at 120 psi.

This is first and foremost an inline fuel pump, and as such we recommend they be installed between the factory (or another aftermarket) in-tank fuel pump, and the fuel rail. These can also be installed in the fuel tank if you choose, but of course some custom fabrication will usually be required. In addition, feeding these inline pumps with another pump (in series), will boost the output of the Proflow EFI pump even higher. The pump is outfitted with an -10AN inlet and -8AN outlet and modern roller cell internals. Due to the tolerances of the roller cell, it is recommended that a pre filter is also fitted.

So why would you consider fitting this Proflow pump over one of the most popular aftermarket performance fuel pumps ever made? There are more than a few reasons:

• The Proflow EFI pump is more affordable when compared to the Bosch 044, yet it still manufactured to exacting standards
• The Proflow EFI pump is confidently E85 compatible
• The Proflow EFI pump is supplied with its own wiring plug kit including terminals and boots. These are not supplied with a Bosch pump, or many other aftermarket pumps for that matter
• The Proflow EFI pump is also supplied with fittings, whereas with a Bosch pump these are typically extra – costing anywhere from $20 - $40
• The Proflow EFI pump has a built in check valve. Consider that throughout the entire Bosch Motorsport fuel pump product line the check valve is unfortunately part of the actual outlet fitting meaning that it is typically removed for almost any installation. The issue with this is it leaves you needing to spend another $30-$50 on an external check valve.
• Designed to be compatible with all 044 compatible brackets, which are common and cheap
• Massive 380LPH flow rate making it able to handle higher horsepower applications
• 12 month warranty

Proflow Fuel Pump Bracket Specifications:

• Strong forged alloy construction
• Anodized Silver finish
• Supplied complete with rubber insulator and stainless steel adjusting bolt