VE V8 ORSSOM OTR MAFLESS COLD AIR INTAKE KIT HOLDEN COMMODORE & HSV 11-13

POWER, PERFORMANCE & ECONOMY is what is achieved by installing one of these Orssom Performance Cold Air Intakes!
“No wonder ORSSOM is the VE Holden owner’s most popular choice when it comes to Over The Radiator Cold Air Intakes”.

Due to overwhelming sales and popularity of the Orssom Performance Cold Air Intake (Aust reg design No: 315677) to keep up with demand Orssom have recently started manufacturing these intakes out of a premium quality OEM grade injected plastic.
Orssom Performance products are NOT vacuum formed or rotational moulded like most cheaper intakes in today’s market, which use recycled plastics.

Orssom products are made from factory OEM grade plastic material similar to that found in other plastic components under you bonnet. Other inferior grade, competing products over time, will not stand up to the under bonnet temperatures resulting in cracking & distorting, neck areas collapsing, air filters falling out of them until finally they find their way into the rubbish bin.

Using a genuine K&N air filter with a huge surface area, the Orssom OTR offers huge flow with perfect filter retention. The filter has an outside width 478mm (18.813"), outside height of 144mm (5.688") and an outside thickness of 30mm (1.188").
Once installed to the vehicle, the filter is retained in a recessed base and is then securely seated by the top cover assembly which is then screwed down.  Nothing but cool, clean air will ever get past this air filter!

The Orssom OTR kit is specifically designed for the DIY enthusiast and can be fitted using simple hand tools in around 30mins! The package includes the high grade plastic OTR, a K&N panel filter, full fitting kit and we even provide installation instructions! If that's not enough, a range of helpful videos can be found on the Orssom youtube channel shown below!

What you get in this OTR Kit:

• Top Intake Cover
• Lower Filter Housing
• Genuine K&N Air Filter re-washable (Part No 33-2640)
• 3 x OTR Mounting Brackets
• 2 x 102mm Rubber Bellows 
• 3 x Speed Clips
• 3 x Phillips Head Screws
• 1 x 10mm Length Vacuum Breather Hose
• Fitting Instructions
• Intake Air Temp (IAT) Sensor
• IAT Sensor wiring extension harness

The benefits of the “Orssom Performance” intake over the competition are:

• Due to the wide, beautiful flowing design of the Orssom OTR, you do not need the extra expense of side dress up panels as with other brands
• NO laying back of radiator to fit the intake
• NO cutting or lengthening of any electrical wires
• NO cutting of any body panels to fit intake
• NO removing bumper bars to clean or replace air filters
• Due to no modifications to the car, the car can easily be returned to standard when selling etc
• Strong design and internal bracing means this OTR will never crack, deform or let anything past the filter but clean, cool air
• Safely and securely packaged in a purpose designed shipping carton with moulded foam supports

Don’t let the sleek, Factory appearance of the intake fool you! Immediately upon installing the intake, you will notice the instant throttle response and smoothness in acceleration. You will also notice, you don’t have to accelerate as far to get you to the speed you were traveling prior to fitting the intake. Under hard acceleration the intake gives a nice deep, throaty induction sound, just enough to let the guy at the set of lights next to you, know that you have some serious business under the bonnet!

Extensive research and development has gone into designing the Orssom Performance Over The Radiator Cold Air Intakes. Be it on road testing, track or on the dyno the following are major proven factors that will be achieved when fitting an Orssom Performance OTRCAI to your vehicle.

On the Street:

• Cooler air intake temperatures
• Increased air flow to your engine
• Increase in power and torque
• Excellent throttle response
• Improvement to your fuel economy
• Orssom induction sound
• OEM style for that stealth under bonnet appearance

On the Strip:

• Cooler air intake temperatures
• Increased air flow to your engine
• Increase in power and torque
• Excellent throttle response
• Gains between 3 to 5 mph terminal speed
• Up to 1/2 a second off your ET (elapsed time) on the 1/4 mile
• Orssom induction sound

Fitment notes:

• Suit VE Commodore Sept 2011 - Up to 2013.  For vehicles built Aug 2011 and earlier please see our other listings.
• MAFLESS tune is required.
• This kit is supplied complete with the Intake Air Temp (IAT) Sensor & wiring extension harness. You will need to drill a hole into the OTR for fitting of this.
• The intake can be installed in around 30 minutes, with the aid of: 7mm & 10mm socket and ratchet, Phillips head and straight blade screw driver, sharp knife or razor blade to trim the hood seal and the fan shroud clips.
• Easy to follow fitting instructions come in the kit.
• For further information, please review the installation instructions shown in the images for this listing.

Orssom Performance products are backed by a 12 months Manufacturer's Warranty from purchase date, against faulty manufacturing (Failure to follow fitting instructions procedure will void warranty).

Recently poor quality copies of these intakes have surfaced on the market.

How to identify a copy:

• Genuine Orssom Performance Intakes have several distinguishing marks and features on them.  You will view these marking shown in our product photo's listed.
• Genuine Orssom Performance Intakes are Injected Plastic not Fibreglass
• Genuine Orssom Performance Intakes have the Orssom Performance  Logo embossed on the Top lids
• Genuine Orssom Performance Intake have 2 support braces which are located at the front opening on the Top lid

Tuff Car Parts are a fully authorised ORSSOM dealer and you can be assured of being supplied with a 100% GENUINE ORSSOM intake!

Don't take our word for it though! See just how these are for yourself!