Aeroflow High Performance Ignition Coil Set & Aeroflow 8.5mm High Performance Black Ignition Leads
Suitable for VZ Holden Commodore L76 & L98 6lt V8
Suitable for VZ Holden Commodore L76 & L98 6lt V8
This Ignition Upgrade Kit is comprised of top quality parts from Aeroflow Performance. Comprised of an Aeroflow Xpro Xtreme 8.5mm Ignition Lead set and 8 x Aeroflow Xpro High Performance Ignition Coils, this Ignition Upgrade kit is everything your Commodore could ever need. Enjoy the far stronger spark which will aid in delivering a smoother idle, better mid-range power and a flawless engine start, every time.
Aeroflow has become synonymous with premium quality performance products. Aeroflow's objective has been to incorporate state-of-the-art manufacturing, aerospace quality materials and rigid quality controls to produce quality performance products at extraordinary value. Aeroflow has taken its forward thinking knowledge to the street, manufacturing a wide range of race quality products to improve street performance and dependability.
Aeroflow Xpro High Performance Ignition Coil Set
Aeroflow now offer a powerful performance upgrade for the L76 & L98 engines. These coils are a direct bolt-in and are engineered with high quality internal materials and components for coils that will produce higher voltage and spark energy.
While based on the OEM form for ease of installation, these have been engineered with performance improvements in mind! The internal windings and materials are optimized to boost the spark output and efficiency of the coil resulting in increased performance for your engine.
Aeroflow Xpro coils will improve the performance of your vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and 48,000 maximum volts. They mount directly in place of the factory coil and accept the factory connectors for an easy installation. No tuning or any other changes are required to fit these coils – just bolt on, plug in and drive away!
Specifications:
- Part Number: AF4020-8265
- Coil Style: Coil pack
- Coil Internal Construction: Epoxy
- Coil Wire Attachment: Female/Socket
- Coil Color: Black
- Mounting Bracket Included: No (fits straight to original)
- Quantity: Sold as a set of 8
- 12 month warranty
Aeroflow XPro Xtreme Ignition Products 8.5mm High Performance Ignition Leads
The Aeroflow 8.5mm XPro Wire is "the" performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of XPro Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, Aeroflow use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.
Aeroflow's 8.5mm XPro wire sets have a special helically wound core that has just 40-50 ohms of resistance per foot--but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 ft. of tightly wound copper for superior conductivity. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit.
Supplied complete with clip on numbered lead markers.
Specifications:
Aeroflow's 8.5mm XPro wire sets have a special helically wound core that has just 40-50 ohms of resistance per foot--but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 ft. of tightly wound copper for superior conductivity. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit.
Supplied complete with clip on numbered lead markers.
Specifications:
- Part number: AF4030-32813
- Assembled: Yes
- Diameter (mm): 8.50mm
- RFI Suppression: Yes
- Wire Color: Black
- Distributor Terminal Ends: Stock
- Distributor Boot Color: Black
- Distributor Boot Material: Silicone
- Spark Plug Boot Ends: Eight multi-angle
- Spark Plug Boot Color: Black
- Spark Plug Boot Material: Silicone
- Conductor Style: Spiral core
- Quantity: Sold as a set of 8
- Length: Approximately 8" length end to end
- Low resistance: 40-50 ohms per foot
- High EMI Suppression
- Supplied complete with clip on numbered lead markers
- 12 month warranty
Fitment notes:
-
Direct performance replacement for VZ Holden Commodore L76 & L98 6lt V8
SKU | AF4020-8265_4030-32813_01 |
Barcode # | Does not apply |
Brand | Aeroflow Performance |
Shipping Weight | 3.0000kg |
Unit Of Measure | ea |
Be The First To Review This Product!
Help other Tuff Car Parts users shop smarter by writing reviews for products you have purchased.